Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Four Corners
Duct sealing in Four Corners typically runs $450 – $1,200 depending on how many leaks we find and where they sit. Most jobs are finished in a single visit, and we give you a written price before any work starts. If you live off a dirt road near Sienna Parkway or out toward the newer developments by Fort Bend County line, you’re dealing with dust and attic heat that most Houston-area homes don’t see. Our crews work in Four Corners regularly and know what these duct systems look like when they fail. Call (713) 936-5800 and we’ll schedule an inspection that tells you exactly what’s leaking and what it costs to fix.
Why Hollis Air Duct Houston Is Four Corners’s Preferred Duct Sealing Company
Four Corners homeowners call us because we write the price down before we touch anything. That matters when you’ve been burned by a lowball quote that doubled once the tech was in the attic. Our Duct Sealing team runs on The Garrison Standard: arrive inside the quoted window, price in writing, do the job by the book, leave the site clean. Every technician is background-checked and uniformed, so you know who’s walking into your home before they get there.
Roy Castellanos leads our Houston operation and holds crews to one rule: if the seal fails within 365 days, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job. We don’t ask you to trust us on vibes. We ask you to read the guarantee and then watch us honor it.
Styles & brands we work with




Duct Repair in Four Corners
Duct repair in Four Corners usually means fixing split flex ducts, reconnecting joints that have popped apart, or replacing sections that sagged and tore under their own weight. Homeowners here find out they need it when one room stops cooling, the electric bill spikes in July, or dust shows up on every register a few days after they cleaned the house.
Split Flex Ducts in Attic Heat
Most Four Corners homes run flexible ductwork through attics that hit 140°F in August. The outer jacket dries out, the inner liner cracks, and the duct splits along the seam. When that happens, your system pulls attic air, blown-in insulation, and dust from unpaved roads straight into the supply run.
Loose Connections and Popped Joints
Older ranch homes off Sienna Parkway and along FM 1092 often have original sheet-metal trunk lines with flex duct branches. The connections loosen over time as the metal expands and contracts. We reseal them with UL 181 mastic and metal-backed tape, not the gray plastic tape that dries up in two summers.
Air Duct Sealing in Four Corners
Air duct sealing in Four Corners is about finding every leak, from the return plenum to the last register boot, and closing it with materials rated for the heat and humidity we get here. A typical whole-house sealing job in this area runs $600 – $1,200 for a 2,000-square-foot home. Smaller jobs, like sealing a single split duct or one plenum connection, start around $450.
Mastic and Metal-Backed Tape, Not Hardware Store Tape
We use UL 181-rated mastic and foil-backed tape because they stay flexible in 140°F attic heat. The cheap stuff hardens, cracks, and falls off within two summers. In Four Corners, where attic temperatures stay brutal for months, the wrong tape is a guaranteed callback.
Sealing the Return Side Matters as Much as Supply
A leaky return duct pulls attic air into your system before it ever reaches the coil. That means your A/C works harder, your filters clog faster, and you’re breathing whatever’s in your attic. We seal both sides and test the system with a pressure gauge when we’re done.
Trusted Brands We Service in Four Corners
We work on systems from every major manufacturer and use professional-grade equipment from Rotobrush, Nikro, and Honeywell on every job. That means the sealing materials and inspection tools we bring to your Four Corners home are the same ones commercial crews use on hospitals and office buildings, not the aisle-end clearance rack at a big-box store. We keep mastic, tape, and common flex duct sizes stocked for fast turnaround on local jobs.
Common Duct Sealing Problems We See in Four Corners Homes
- Sagging flex ducts that pool condensation: Humid Gulf air meets cold duct surfaces in the attic, condensation forms, and the duct wall weakens until it tears open under negative pressure. We add support straps and seal the tear, but if the sag is bad enough, we replace the section.
- Dust-clogged blower fins from unpaved roads: Fine dust from dirt roads and open land coats the blower motor fins, reduces airflow, and raises static pressure until old duct joints pop apart. We clean the blower wheel as part of a full sealing job.
- Fiberglass insulation pulled into supply runs: Split ducts in hot attics create negative pressure that sucks blown-in insulation into the system, and then it blows into your living room. Camera inspection finds the split fast.
- Creosote film from wood heat: During wood-heat season, sticky creosote-laden air can backdraft into return ducts and coat the interior. That film prevents mastic from bonding, so we have to clean the duct surface before sealing.
Last August, our crew sealed a ranch-style home off Sienna Parkway where the homeowner complained of dust coating every register within days of cleaning. Camera inspection showed two 8-inch flex ducts in the attic had split at the seams, pulling fiberglass insulation into the supply run. We resealed the splits with UL 181 mastic and metal-backed tape, then reconnected the ducts to the supply plenum and verified negative pressure at each register.
See the difference
Before
After
Before
After
Before
AfterPricing for Duct Sealing in Four Corners, TX
We Also Serve Cities Near Four Corners
Hollis Air Duct Houston serves Duct Sealing in Four Corners and the surrounding communities. If you’re in Houston, Spring, Humble, or League City and need duct sealing, repair, or a full inspection, our crews cover those areas as well. Dispatch and scheduling are coordinated from our Houston office, and crews serve Four Corners locally.
Serving Four Corners, TX - Our Local Coverage Area
We’re based in the Four Corners area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Four Corners
How often should ducts in Four Corners be sealed, not just cleaned?
Ducts in Four Corners need sealing whenever a leak is found, not on a fixed schedule. With attic heat above 140°F, flex ducts can split within a few years of installation. We recommend a camera inspection every two to three years, especially if you notice dust on registers or uneven room temperatures. Call (713) 936-5800 and we’ll schedule an inspection that tells you what’s leaking.
Does living on an unpaved road in Four Corners make duct sealing more urgent?
Yes. Dust from unpaved roads loads the system faster, clogs the blower, and raises static pressure until weak joints fail. If your driveway is gravel or dirt, check your registers monthly. If they’re dusty a week after cleaning, you likely have a duct leak pulling attic air and road dust into the system.
Can attic heat damage sealed ducts in Four Corners even if the A/C is new?
It can. The seals we install are rated for high heat, but the duct material itself still ages. Flex ducts in 140°F attics degrade faster than the same ducts in cooler spaces. A new A/C doesn’t protect old or poorly supported ductwork. If your system is new but your ducts are original, get them inspected.
How does wood heat in Four Corners affect the duct sealing work you do?
Wood heat creates creosote-laden air that can backdraft into return ducts and leave a sticky film inside. Mastic won’t bond to that film, so we have to clean the duct surface before sealing. If you burn wood regularly, tell us when you call, and we’ll include that cleaning in your quote.
Will sealing my ducts in Four Corners keep out blown-in attic insulation?
Yes. Sealed ducts can’t pull insulation into the system, because there’s no opening for it to enter through. If insulation has already been pulled into your ducts, we’ll find it during inspection and clean the affected runs before sealing. A sealed system stays clean longer, and the insulation stays in the attic where it belongs.
Get Your Duct Sealing Quote for Four Corners Today
If you’re ready to find out what’s leaking in your duct system, call Hollis Air Duct Houston at (713) 936-5800. We’ll walk you through what we found, what it costs to fix, and what the 365-Day Done Right Promise covers. Written price before work starts. Live person on the phone. No pressure.
Written by Roy Castellanos, Owner at Hollis Air Duct Houston, serving Four Corners and the surrounding communities.